Ferrules & Crimps in Aluminium, Copper & Stainless Steel
Ferrules and crimps are used for forming soft eyes and loops and stops on stainless and galvanised wire rope. They are also known as wire rope sleeves and cable crimps. TECNI stock TALURIT aluminium, copper and stainless ferrules and crimping tools manufactured to the highest standards. Please note that TECNI also stock bigger sizes than the items available from the webstore so please contact us if you don't see the item you require. What size ferrule should I use?
If crimping by hand go size for size. Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
If using a hydraulic press, go up a half size. Example: Use a Code 2.5 ferrule for a 2mm wire, Code 6.5 ferrule for a 6mm rope. For larger sizes go up one size so for an 8mm rope use a Code 9 ferrule.
For Stop ferrules, go size for size.
Which tools can I use for which ferrules?
See page 8 of the catalogue.
The TECNI hand crimper will crimp from Code 1 to 2.5 copper and aluminium ferrules.
The hydraulic crimpers should be used for larger ferrules and stainless steel ferrules and fittings.
TALURIT is a trademark owned by Talurit AB. All unauthorised use is prohibited.