Supply Quantity: Each Catalogue Code: 193.005.333 Part Code: TG-T15-ELLIPSE Item Description:
Extremely rapid installation
Reusable for future projects
Very compact design & strong termination
No specialist tools needed
Simply fit & adjust by hand!
This unique & versatile TECNI®Grip ellipse fitting is designed for supporting 1mm - 1.5mm cables vertically or horizontally. To install, simply insert the cable into the plunger, out though the side exit, then screw onto a flat surface to tension (screws not supplied). The fitting is perfect for display & suspension applications such as shop fittings, shelving, cable tensioning etc.
TECNI®Grip holders are designed to be as strong as the range of cable diameters & constructions that they fit. A 5:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. E.g. 1.5mm 7x7 galvanised cable Minimum Breaking Load (MBL) = 145kgs with a Type 15 TECNI®Grip. The Working Load Limit (WLL) = 145/5 = 29kgs.
Product Standard: COMMERCIAL QUALITY - NO NATIONAL OR INTERNATIONAL STANDARD
Export Commodity Code:
MBL: SUBJECT TO CABLE DIAMETER USED
WLL: Type 15 TECNI-Grip = 8kgs 1mm 7x7 Cable & 12kgs 1.2mm 7x7 Cable & 16kgs 1.5mm 7x7 Cable
FOS: SEE LOADING CHART